The every day things from Thalamus' life.

Thalamus' Blog

22 December, 2016

Cabinet parts produced

Filed under: Pinball — Thalamus @ 14:35

My colleague, Marius, helped me today to cut the cabinet parts. It’s has arrived at my apartment about half an hour ago. We pondered a bit about the sizes from the Williams Widebody drawings since the material used where 18mm instead of 15mm that we had available.

When I put the base cabinet parts together it became quite obvious that something is not 100% correct. The drawing state that we should cut the corners at an 45 angle degree, That can explain some of the reason why the total length looks to be slightly off. And the wood itself is of course when you just mock it up like this – stealing some length as well.

I’ll have to ponder a bit about what to do next. I can’t really cut the sides to smaller lengths either because of the metal rails I have for the glass cover.

Hmm.. To be continued … 🙂

Willams Widebody

• • •
 

No Comments »

No comments yet.

RSS feed for comments on this post.

Leave a comment

You must be logged in to post a comment.