The every day things from Thalamus' life.

Thalamus' Blog

26 December, 2016

Progress

Filed under: Pinball — Thalamus @ 20:10

Looking at earlier pictures it may seem that I haven’t done much lately. Well, both true and false. I had some issues that isn’t fully resolved. The pf monitor is attached to a VESA bracket. But, this bracket is still allowed to move too easily. What you don’t see is that the legs – all of them has been attached. I planned to put the rest of the hardware into the cab, but, since the original measurements are 18mm plywood and I’ve run with 15mm. That requires me to shim some of the parts in order to make them fit. The flipper buttons are one of these.

I almost 100% sure now, where to put flipper holes but decided that I’ll wait after I’ve been to the shop and know if I’m able to get some solution for my missing 3mm. I will need to do some test cuts for the plunger as well.

So, to put it short. Complete all wood stuff before attaching the rest of the hardware. Don’t want a computer full of crud.

• • •
 

No Comments »

No comments yet.

RSS feed for comments on this post.

Leave a comment

You must be logged in to post a comment.